*
NOTE *:
Shipping anywhere in the lower 48 states
is free
for each of the items listed below. Please
remember to send an email when you order
anything from our store. Always include your email,
shipping and regular mail address, and your phone #.
That way if there is any problem with your order we
can call you directly.
Thank you,
Michael Wahl (Owner)
Rocket Broadheads
#1-ROCKET-J41
/
Wolverine-3,
3 pack. 57 grains, 1 1/4" cutting diameter, with three
0.027" thick blades. Perhaps the lightest head to ever take a buffalo
in a single shot, the Wolverine-3 is the lightest, fastest, and
grain-for-grain toughest hunting arrowhead ever made. Perfect for the
speed shooter interested in the flattest trajectory, the Wolverine-3 also
works equally well with low poundage bows. The shortness of the blades,
and their angle out from the body when closed, make for a quick
opening at lower speed.
$
#2-ROCKET-U167
/
Wolverine-4, 3 pack, 60 grains, 1 1/4" cutting
diameter, with four
0.027" thick blades. The Wolverine-4 is the lightest and fastest
four-blade hunting arrowhead made. It has the same construction
as the Wolverine-3. The blades and chisel tip are interchangeable
with those used on the Wolverine-3. For use with all bows, from the
fastest speed bows to lower poundage bows.
$
#3-ROCKET-J41
/
Wolverine-3P, 3 pack. 75 grains, 1 1/4" cutting
diameter, with
three 0.027" thick blades. The Wolverine-3P is the Wolverine-3 with
our new Pathfinder point leading the cut. The deep-concave cut of
the Pathfinder concentrates a lot of bone-shattering force on a small
surface area, while its extra wide cut means less shaft resistance and
deeper, deadlier penetration. For use with any bow.
$
#4-ROCKET-U167
/
Wolverine-4P,
3 pack, Wolverine-4P: 78 grains, 1 1/4" cutting diameter,
with four 0.027" blades. The Wolverine-4P is the Wolverine-4 with the
Pathfinder tip added. The Pathfinder tip dramatically increases the
penetration of the Wolverine on larger diameter aluminum shafts. The
blades angle out from the body for quick opening. $
#5-ROCKET-J41
/
Miniblaster-3, 3 pack. 75 grains, 1 3/4" cutting
diameter, with three
0.027" thick blades. The Miniblaster-3 is a small bundle of dynamite,
packing a huge cutting diameter in a light weight head. It is designed
for uncompromised field point accuracy at high velocity, where the
blades literally snap open on contact. It is recommended for launch
speeds of 280 ft/sec or greater, at which speed the blades will leave a
full-width entry wound on fur of the same thickness as that of a
whitetail deer.
$
#6-ROCKET-J41
/
Miniblaster-3L, 3 pack. 76 grains, a 1 3/4"
cutting diameter, and three
0.030" thick blades. The same body as the Miniblaster-3 but the blades
have large extended tips for quick opening at lower speeds. The "L"
shaped blades provide several times more blade-opening leverage on
impact (relative to the straight Miniblaster blades) to ensure a full
width open-blade entry wound at lower speeds. Recommended launch
speed is 220 ft/sec or greater.
$
#7-ROCKET-J41
/
Mini Blaster-3XL,
3 pack. 77 grains, 1 3/4" cutting diameter, with
three 0.030" blades. The same body as the Miniblaster-3 but the
blades have extra large (XL) extended blade tips for maximum blade
opening leverage. The blades will open externally on a tomato. The
extra large blade prongs provide a leverage point further away from
the center axis, limiting the amount of energy used to open the blades
at low speeds to the small amount needed to expand the O-ring.
Recommended for speeds under 220 ft/sec.
$
#8-ROCKET-J41 / Sidewinder
3LT, 3 blade 85gr, 3 pack.
Sidewinder-3LT:
Three 0.036" blades, 85 grains, and 1 1/2" cutting diameter. The Sidewinder-3
Lite is the Sidewinder-3 without the Pathfinder point. The blades are
interchangeable with the Sidewinder-3 and 4 and they are also 0.036" thick which
is thicker than the other Aerohead blades. Thicker blades mean less bending and
a more reusable head. Recommended for launch speeds over 220 ft/sec.
$
#8a-ROCKET-P101 /
Sidewinder 4LT,
Sidewinder-4LT:
Four 0.036" thick blades, 88 grains, 1 1/2" cutting diameter, and 1/2" in
flight. The Sidewinder-4 Lite is the Sidewinder-4 without the Pathfinder point.
It has the same hardened steel chisel tip as the other Aeroheads, which creates
a hole plenty wide for shafts which are thinner than the ferrule. The blades are
cut from the same die an those of the Miniblaster-3L but they are thicker and
not interchangeable.
$
#8b-ROCKET-J41 /
Sidewinder-3:
100 grains, 1 1/2" cutting diameter, with three 0.036" thick blades. The
SideWinder-3 is built for penetration. The blades angle further back than the
other Aeroheads and it is tipped with our new Pathfinder cut-on-impact sharpened
steel point. The extra wide cut made by the Pathfinder point means less shaft
resistance and deeper, deadlier penetration, especially with larger diameter
aluminum shafts.
$
#8c-ROCKET-P101 /
Sidewinder-4:
103 grains, 1 1/2" cutting diameter, with four 0.036" thick blades. The
Sidewinder-4 has the same construction as the Sidewinder-3 with the same extra
thick blades and Pathfinder point. The deep concave cut of the Pathfinder point
concentrates a lot of bone-shattering force on a small surface area to break up
bone efficiently before the blades strike. The recommended launch speed is 220
ft/sec or greater.
$
#9a-ROCKET-P101 /
Steelhead-4:
125 Grains, 1
1/4" cutting diameter, with four 0.027" thick blades. The Steelhead-4 features
a four-sided stubby version of our Pathfinder tip. The blades are
interchangeable with those of the Steelhead- 125 and Meteorite-75. For use with
any bow at any speed.
$
#9-ROCKET-J41
/
Steelhead 100, 3 blade 100gr, 3 pack.Steelhead-100:
100 Grains, 1
1/8" cutting diameter, with three 0.027" thick blades. The ferrule of the
Steelhead- 100 is machined in one peice together with a stubby veersion of the
Pathfinder point. for use with any bow at any speed.
$
#10-ROCKET-J41
/
Steelhead 125, 3 blade 125gr, 3 pack.Steelhead- 125:
125 Grains, 1
1/4" cutting diameter, with three 0.027" thick blades. Tough as nails, the
Steelhead- 125 is just possibly the toughest 125 grain head made. It has the
full sized Pathfinder tip. For use with any bow.
$
#11-ROCKET-J41
/
Hammerhead-3L:
Exactly 100 grains,
2" cutting diameter, 3/7" in flight, with three 0.027"stainless steel blades.
The Hammerhead=3L is essentially a larger version of the Miniblaster-3L. The
O-ring is positioned further forward (making it a little stiffer to open) and
the blades are angled back slightly more. A launch speed over 260 ft/sec will
ensure a full width entry wound and optimum penetration. Below 260 ft/sec the
O-ring can be moved back behind the blade notch (about 1/8" to the next small
notch) for a quicker opening.
$
#12-ROCKET-J41
/
#13-ROCKET-P102
/
NailDriver.
100 grains with a solid steel ferrule. 2 blades. 1 1/8" cutting diameter. 3
pack.
$
#14-ROCKET-P102
/
NailDriver.
125 grains with a solid steel ferrule. 2 blades. 1 1/4" cutting diameter. 3
pack.
$
#15-ROCKET-P102
/
The new Buckblaster-125:
Three or six
blades, 110 or 125 grains, 2 3/4" cutting diameter, 1 1/8" in flight with
stationary blades. The new Buckblaster has folding-blade tip extensions to open
the blades a little quicker. The Buckblaster has three folding blades (0.027")
set alongside three optional stationary blades (0.012"). The cuts from the
folding blades follow the cuts made by the stationary blades to increase
penetration. The Buckblaster can be shot without the stationary blades at 110
grains. A high poundage bow is recommended when the Buckblaster is used for
larger game.
$
#16-ROCKET-P102
/
Sledgehammer:
150 grains, 3 1/2"
cutting diameter, with three 0.027" stainless steel blades. The Sledgehammer
delivers a larger payload more accurately than any hunting arrowhead ever made.
It was made in response to demand from customers shooting 80+ pounds who were
slicing through Whitetails with the Buckblaster and still looking for their
arrows. Its also a great turkey head as it delivers a tremendous thump that
keeps them firmly on the ground.
$
#17-ROCKET-J41
/
Ultimate Steel 75,
Constructed from a single piece of steel with a Pathfinder point. 1" cutting
diameter. The .036 extra wide grind Bacon Skinner blades provide increased
penetration. 75 grains. 6 Pack.
$
#18-ROCKET-J41
/
Ultimate Steel 100,
Constructed from a single piece of steel with a Pathfinder point. 7/8" cutting
diameter. The .036 extra wide grind Bacon Skinner blades provide increased
penetration. 100 grains. 6 Pack.
$
#19-ROCKET-J41
/
Ultimate Steel 125,
Constructed from a single piece of steel with a Pathfinder point. 1 1/16"
cutting diameter. The .036 extra wide grind Bacon Skinner blades provide
increased penetration. 125 grains. 6 Pack.
$
#20-ROCKET-J41
/
#21-ROCKET-J41
/
More Archery Gear
To go to other archery gear like
arrows, broadheads etc. just click on the page link below.
