#1-BDBW / THE DOTINATOR - BradBow proudly introduces the BradBow DOTinator, the latest in technology for those who hunt from elevated tree stands. The DOTinator was engineered to give you a definitive edge on shots of up to 35 yards. Whether you choose to lock the DOTinator in a fixed position, or allow it to function as a pendulum, the distinctive green dot will give you a clear target every time. Just line it up, and “Shoot the Dot.”

Sight the DOTinator in at ground level, to a distance of twenty yards, using the windage and elevation adjustments. Once sighted in, the sight will function as a pendulum with a simple loosening of the set screw, which will allow the retainer housing that holds the lens to swing freely. From this point, the sight is “dead on” from right beneath your tree, out to a distance of 30-35 yards, depending on the speed of your bow. The DOTinator will also work as a fixed position sight, with a simple tightening of the set screw, however, the BradBow staff recommends use as a pendulum sight, to eliminate guess work. $104.89

67

#2-BDBW-P / THE STOPPING POINT - With great pride, BradBow announces the launch of its second product, the BradBow Stopping Point. If you hunt from ground level, the Stopping Point was built with you in mind. True to its name, this exciting new bow site does just what it says, it provides the “Stopping Point” for that deer you’ve been tracking. Line up your shot, and “Shoot the Dot.”

The Stopping Point uses the same pendulum housing as the DOTinator, but the housing is mounted on an adjustable bracket. While this sight will function as either a pendulum or a fixed position sight, the Stopping Point is accurate to a longer distance, through use of its travel arm. To shoot as a pendulum, simply run the travel arm to the bottom, and lock in place with a simple counter-clockwise turn of the knob. Using the windage and elevation adjustments, sight in to a distance of 20 yards, and mark, using the tape provided. Now, the sight is ready to function as a pendulum, with a simple loosening of the set screw on the housing. You must be at an elevation of 15 feet or higher for the sight to function properly.

To shoot the Stopping Point as a fixed position sight, simply lock the set screw on the housing. Through use of the travel arm, accuracy is maintained to greater distance, simply sight in the Stopping Point to preferred distance and mark with provided tape. $114.89

76

To go to other archery gear like arrows, broadheads etc. just click on the page link below.